Small x3 gt - specifications (2023)

Business brand that manufactures the device.

Device Model Name.

Information about the width, that is, the horizontal side of the device when used in its standard orientation.

Information about the height, that is, the vertical side of the device when used in its standard orientation.

Information on the thickness/depth of the device in different measures of measurement.

Information about the weight of the device in different measures of measurement.

Estimated volume of the unit, calculated from the dimensions provided by the manufacturer.It applies to the units in the form of a rectangular parallel.

Colors information where the device is available in the market.

Materials used to make the device body.

Information about the type and size (form factor) on the SIM card used on the device.

Information on the number of SIM cards, compatible with the device.

Information about some specific features related to the device's SIM card.

GSM (Global System for Mobile Communications) was developed to replace the analog network of Cell Network (1G), therefore it is known as a 2G mobile network.It has improved with the addition of the general packing packages (GPRS) and later through improved data rates for GSM Evolution (EDGE) technology.

CDMA (Multiple Code Division Access) is a channel access method for communication in mobile networks.Compared to other 2G and 2.5G standards such as GSM and TDMA, it provides higher data transfer rates and allows more subscribers they connect simultaneously with the network.

W-CDMA (Multiple Access of Broadband Code Division) is an air interface used by 3G mobile networks.It is one of the three different UMTS interfaces along with TD-SCDMA and TD CDMA.The standard provides faster speeds faster data transfer and allows more users to connect to the network at the same time.

It is considered that LTE is the fourth generation (4G) of mobile communication technology.Further to the technology is called LTE Advanced.

5G mobile networks (fifth generation) Use the new radio access technology (rat) developed by 3GPP, called 5G no and is considered the global standard of the air interface for 5G.5G no Networks Works in two frequency areas: FR1 (SUB -6 GHz) and FR2 (Over 24 GHz).In the frequency range of FR1, 5G mobile networks use a number of tapes, some of which are traditionally used by previous standards.FR2 provides a number of shorter but a larger bandwidth available than the tapes in FR1.

There are several networking technologies that improve the performance of mobile networks mainly due to the increase in data ribbon width.Information on communication technologies that are compatible with the device and their respective increasing link ribbon width and falling link.

Information about the operating system used by the device and its version.

SOC integrates various hardware components such as CPU, GPU, memory, peripheral devices, interfaces, etc. and software for its operation.

Information on process technology used to make the chip.The value in nanometers represents half the distance between elements that make up the CPU.

The CPU is the central treatment unit or processor for a mobile device.Its main function is to interpret and perform instructions contained in software applications.

The CPU bites are determined by the bit size of the processor register, addresses and data.64 -bit CPUs provide better performance than 32 bits, which for their side work better than 16 -bit processors.

The architecture of the instruction set (ISA) is a set of commands used by the software to manage CPU's work.Information about the set of instructions that the processor can perform.

A CPU core is the processor device that performs software instructions.In fact, in addition to single -nucleus processors, there are double, four cores, the HEXA core, etc. in several processors.They affect the performance of the device that allows the execution of several parallel instructions.

The frequency of the processor describes its urge to cycle per day.Second.It is measured in Megahertz (MHz) or Gigahertz (GHz).

GPU is a graphic treatment unit that manages the calculation for 2D/3D graphic applications.In mobile devices, GPU is usually used by games, IU, video reproduction, etc. GPU can also calculate in applications traditionally handled by the CPU.

Like the CPU, the GPU consists of treatment units called cores.They have the calculation of graphics in several applications.

The frequency is the watch velocity of the graphic processor (GPU) measured in Megahertz (MHz) or Gigahertz (GHz).

The operating system uses RAM (Random Access Memory) and all installed applications.Data in RAM are lost after turning off or restarting the device.

Information about the type of RAM used by the device.

Information on the number of RAM channels integrated into SOC.More channels mean higher data transfer rates.

RAMS Frequency is directly related to reading/writing the speed from/in RAM.

Information about the built -in storage capacity of the device.Sometimes the same model is offered in variants with different internal storage capacity.

The different types of memory cards are characterized by different sizes and capacity.Information on compatible memory card.

One of the main characteristics of the screen is its type/technology, where it depends on its performance.

In mobile devices, the screen size is represented by the length of its diagonal measured in inches.

Approximate screen width

Approximate screen height

The relationship between the long and the short screen

The visualization solution shows the number of pixels on the horizontal and vertical side of the screen.How to be larger is the solution, it will be greater details.

Information on the number of pixels percentage (PPCM) or perEmpty (PPI) on the screen.Highled How is the pixel density, more detailed and clearing the information is shown on screen.

The color depth of the screen is also known as depth.Sample the number of bits used for the color components of a pixel.Information about the maximum number of colors that the screen can display.

The estimated percentage of the screen area from the front area of the device.

Information on other features and features on the screen.

The sensors vary in type and purpose.They affect the general functionality of the device where they are integrated.

Information about the type of camera sensor.Some of the most commonly used image sensors on mobile devices are CMOs, BSI, Isocell, etc.

The optical format of an image sensor is an indication of its shape and size.It is generally expressed in inches.

The pixels are generally measured in microns (µm).The largest are able to detect more light, therefore they will offer better slides with low light and a wider dynamic interval compared to the smallest pixels.On the other hand, the smaller pixels allow the increases in the time that retains the same sensor size.

The opening (number F-stop) indicates the size of the lens membrane opening that controls the amount of light reached with the image sensor.Make the lowest is the F-stop number, the largest is the membrane opening, therefore more light more light when the sensor.When the specified F-STOP number is what corresponds to the maximum possible membrane opening.

Information about the number of lenses used by the camera's optical system.

The rear cameras on mobile devices mainly use a joint flash.It can be in a unique configuration, double or more lights and in different events.

One of the most important features of the cameras is its image resolution.It says the number of pixels in the horizontal and vertical dimensions of the image, which can also be displayed in megapixel, indicating the approximate number of pixels in millions.

Information about the maximum resolution where the rear camera can record videos.

Information on the maximum number of frames perSecond (FPS) recorded by the rear camera while detecting the video to the maximum resolution.Some of the most important standard book speeds to record and play videos are 24 FPS, 25 FPS, 30 FPS, 60 FPS.

Information on software and additional hardware features of the rear camera that improves its general performance.

The pixels are generally measured in microns (µm).The largest are able to detect more light, therefore they will offer better slides with low light and a wider dynamic interval compared to the smallest pixels.On the other hand, the smaller pixels allow the increases in the time that retains the same sensor size.

The opening (number F-stop) indicates the size of the lens membrane opening that controls the amount of light reached with the image sensor.Make the lowest is the F-stop number, the largest is the membrane opening, therefore more light more light when the sensor.When the specified F-STOP number is what corresponds to the maximum possible membrane opening.

Information about the number of pixels in the horizontal and vertical dimensions of the photos taken by the front camera also listed in megapixels.

Information about the maximum resolution of the videos taken by the front camera.

Digital cameras can record videos for different frames perSecond (FPS).Some of the most important standard book speeds to record and play videos are 24 FPS, 25 FPS, 30 FPS, 60 FPS.Information about the maximum possible SPF possible to shoot with the maximum possible resolution.

Information on additional software and frontware features of the front chamber that improves its general performance.

The speaker is a device that reproduces several sounds, such as ringtones, alarms, music, voice calls, etc. Information about the type of speakers used by the device.

Information if the device has an FM radioreceptor or not.

The monitoring/positioning service is supplied by several satellite navigation systems that track mobile devices such as the improved time difference, 911 improved, GSM -Cell -ID.

Wi-Fi communication between devices is performed through the IEEE 802.11 standards.) It is another useful standard that allows devices to communicate with each other without the need for a wireless access point (WAP).

The technology has several versions that improve the connection speed, the range, the connection and the possibility of detecting the devices.Information on the Bluetooth version of the device.

Bluetooth uses multiple profiles and protocols related to a faster data exchange, energy saving, better device discovery, etc. Some of those supported by the device are listed here.

There are several types of USB connectors: Standard, mini and micro -plugs, plugs on the go, etc.usb -plug -Type used by the device.

There are several versions of the universal serial bus standard (USB): USB 1.0 (1996), USB 2.0 (2000), USB 3.0 (2008) etc. With each version, the data transfer rate increases.

USB interface on mobile devices can be used for different purposes, such as battery charging, using the device, such as mass storage, host, etc.

Information if the device is equipped with a 3.5mm audio plug.

Information about some of the most used connection technologies that are busy with the device.

Information about some of the properties and standards that are compatible with the device browser.

List of some of the most common audio file formats and codecs recorded by the device.

List of some of the most common video file formats and codecs that are compatible with the device.

The ability of a battery shows the maximum load that can be stored, measured at the time of Miliame.

The type of battery is determined by its structure and more specifically by the chemicals used in it.There are different types of batteries and some of the most commonly used on mobile devices are lithium ions (lithium ions) and the polymer battery of lithium ions (Li-Potent).

Information on the electric current (Ampere) and the voltage (Volt) outputs of the charger.The largest output power allows a faster load.

Information on some additional features of the device battery.